- phenixbb - phenix-online.org

Re: [phenixbb] Stalled refinement
by Kay Diederichs 18 Apr '14

18 Apr '14

Hi Yarrow, of course the data quality will suffer but ultimately it depends on the amount of splitting - as long as the integration profile covers both parts then the total intensity is conserved, and recovered. I have seen many datasets with split reflections that were usable for MR and refinement. But I doubt that many of these would be suitable for experimental phasing. best, Kay Am 18.04.14 23:21, schrieb Yarrow Madrona: > Hi Kay, > > Looking at the data I can see that many of the spots are actually split. > I guess this may be causing problems in refinement if split spots are > integrated as a single spot? > > > On Fri, Apr 18, 2014 at 2:17 PM, Kay Diederichs > <kay.diederichs(a)uni-konstanz.de <mailto:[email protected]>> > wrote: > > It is a good idea to try several data processing programs in > difficult cases. > > BTW the latest MOSFLM can also integrate two (or more) lattices. > > Pls report your results. > > Kay > > > Am 18.04.14 22:59, schrieb Yarrow Madrona: > > Thanks Kay, > > XDS kicked out a lot of reflections. There were about 23,000 > rejected > reflections out of ~ 190,000 collected. I can clearly see > another minor > lattice in many frames and I presume that the rejections are > coming from > the minor lattice that was not selected. I was thinking of > processing > with EVAL15 to see if I get better results. Thanks for your > help. Maybe > respond off-line as this is a discussion maybe more suited for > another > mailing list (CCP4?). > > -Yarrow > > > On Fri, Apr 18, 2014 at 7:11 AM, Kay Diederichs > <kay.diederichs(a)uni-konstanz.__de > <mailto:[email protected]> > <mailto:kay.diederichs@uni-__konstanz.de > <mailto:[email protected]>>> > > wrote: > > Hi Yarrow, > > the problem is that during structure solution, many wrong > paths may > have to be followed until finally identifying the correct path. > > So the general answer to this kind of problem is: in some > way, your > parameterization of the experiment is wrong or incomplete. > > From what you write, data quality does not seem to be the > problem. > But: did XDS really integrate _all_ the reflections, or only a > subset (say, every second reflection)? > > Check out > http://strucbio.biologie.uni-____konstanz.de/ccp4wiki/index.____php/Refinem… > <http://strucbio.biologie.uni-__konstanz.de/ccp4wiki/index.__php/Refinement#…> > > > <http://strucbio.biologie.uni-__konstanz.de/ccp4wiki/index.__php/Refinement#… > <http://strucbio.biologie.uni-konstanz.de/ccp4wiki/index.php/Refinement#what…>> > > If, after thorough attempts, you fail to find the solution, > upload > your current model, sequence and raw data frames to a > Dropbox folder > and post the link here - there may be people who succeed in > processing the data nicely, or otherwise can identify the > problem > based on the data (rather than based on your description only). > > HTH, > > Kay > > Am 18.04.14 01:25, schrieb > phenixbb-request(a)phenix-____online.org > <mailto:phenixbb-request@phenix-__online.org> > <mailto:phenixbb-request@__phenix-online.org > <mailto:[email protected]>>: > > > Date: Thu, 17 Apr 2014 16:25:00 -0700 > From: Yarrow Madrona<amadrona(a)uci.edu > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>>> > To: PHENIX user mailing list<phenixbb(a)phenix-online.____org > <mailto:phenixbb@phenix-__online.org > <mailto:[email protected]>>> > > Subject: [phenixbb] Stalled refinement > Message-ID: > > > <__CAMHjG6bPE4q1xWidpE2VwFMJ9qLS____qjtLRuLMM1ef9vWBHBfZKg(a)mail.____gmail.com > <http://gmail.com> > > <mailto:CAMHjG6bPE4q1xWidpE2Vw__FMJ9qLSqjtLRuLMM1ef9vWBHBfZKg@__mail.gmail.com > <mailto:CAMHjG6bPE4q1xWidpE2VwFMJ9qLSqjtLRuLMM1ef9vWBHBfZKg@mail.gmail.com>>> > > Content-Type: text/plain; charset="utf-8" > > > Hello, > > I using the latest stable build of phenx.refine (1.8.4) > I recently > collected data, processed and obtained an MR solution using > phaser. I am > stuck trying to refine with an Rfree sitting at 40% > > I really want to know if the high Rfree is due to poor data > quality or if > non-crystallographic symmetry involving a near perfect > two fold > rotation > between the two molecules in the ASU could somehow impede > refinement. Stats > and other information is below. Thank you for any help > you can give. > > -Yarrow > > > Visually, the quality of the data is marginal at best > (streaky/ice rings in > many frames) despite good processing stats from XDS. > Processing > with mosflm > or HKL2000 managed to index but failed pretty bad in > integration and > scaling. > > Phaser gave high TFZ scores for 2 molecules in the asu > (see below). > > Density for a cholesterol like ligand shows up even > though not > present in > the search model. > > MolRep Self rotation shows rotational symmetry. > https://www.dropbox.com/s/____2zsajl5o091k50r/CYP142A2-____032814_21_rf%20c… > <https://www.dropbox.com/s/__2zsajl5o091k50r/CYP142A2-__032814_21_rf%20copy.…> > > > <https://www.dropbox.com/s/__2zsajl5o091k50r/CYP142A2-__032814_21_rf%20copy.… > <https://www.dropbox.com/s/2zsajl5o091k50r/CYP142A2-032814_21_rf%20copy.pdf>> > > The 2 molecules in the ASU are related by almost a 2 > fold rotation: > > Rotation matrix for chain A to chain B: > > new_ncs_group > rota_matrix 1.0000 0.0000 0.0000 > rota_matrix 0.0000 1.0000 0.0000 > rota_matrix 0.0000 0.0000 1.0000 > tran_orth 0.0000 0.0000 0.0000 > > center_orth 15.2016 0.5245 33.7070 > > rota_matrix -0.9860 -0.1636 -0.0309 > rota_matrix -0.1659 0.9511 0.2605 > rota_matrix -0.0132 0.2620 -0.9650 > tran_orth 34.3310 -24.0033 107.0457 > > center_orth 15.7607 7.2426 77.7512 > > RMSD, B onto A = 0.0007 after phaser > RMSD, B onto A = 0.347 after one round of refinement in > phenix > > > Refinement using aniostropically corrected data (ucla > web server: > Services.mbi.ucla.edu/____anisoscale > <http://Services.mbi.ucla.edu/__anisoscale> > <http://Services.mbi.ucla.edu/__anisoscale > <http://Services.mbi.ucla.edu/anisoscale>>) did not improve the > > Rfree in refinement. > > > Statistics are listed below: > > UNIT CELL: 51.487 88.923 89.592 90 97.15 90 P21 > > RESOLUTION NUMBER OF REFLECTIONS COMPLETENESS > R-FACTOR > R-FACTOR > COMPARED I/SIGMA R-meas CC(1/2) Anomal SigAno Nano > LIMIT OBSERVED UNIQUE POSSIBLE OF DATA > observed > expected > Corr > > 5.99 8280 1927 2087 92.3% > 3.1% > 3.3% > 8246 35.09 3.5% 99.8* 20* 0.909 1296 > 4.30 14606 3401 3487 97.5% > 3.3% > 3.5% > 14580 33.37 3.8% 99.9* 11* 0.843 2273 > 3.53 17961 4244 4445 95.5% > 3.8% > 3.9% > 17944 31.11 4.4% 99.8* -2 0.789 2721 > 3.06 21954 5068 5221 97.1% > 4.9% > 5.1% > 21933 24.81 5.6% 99.7* -2 0.780 3455 > 2.74 25741 5830 5933 98.3% > 7.6% > 7.6% > 25713 18.88 8.6% 99.5* -2 0.782 4165 > 2.51 27859 6311 6483 97.3% > 10.8% > 10.8% > 27824 14.06 12.3% 99.1* -2 0.774 4385 > 2.32 31336 6979 7084 98.5% > 14.9% > 15.3% > 31296 10.49 16.8% 98.5* -4 0.748 5095 > 2.17 32396 7347 7567 97.1% > 22.3% > 22.7% > 32341 7.46 25.4% 97.3* -7 0.728 5055 > 2.05 32254 7339 8047 91.2% > 33.1% > 33.5% > 32075 5.06 37.5% 94.8* -6 0.724 5155 > total 212387 48446 50354 96.2% > 7.8% > 7.9% > 211952 16.57 8.8% 99.7* -3 0.768 33600 > > Processing with mosflm or HKL2000 managed to index but > failed > pretty bad in > integration and scaling. > > > Phaser: > > SOLU SET RFZ=27.5 TFZ=24.2 PAK=0 LLG=1711 RF++ TFZ=64.6 > PAK=0 > LLG=3610 > LLG=4865 >

1 0

Re: [phenixbb] Stalled refinement
by Kay Diederichs 18 Apr '14

18 Apr '14

Hi Yarrow, the problem is that during structure solution, many wrong paths may have to be followed until finally identifying the correct path. So the general answer to this kind of problem is: in some way, your parameterization of the experiment is wrong or incomplete. From what you write, data quality does not seem to be the problem. But: did XDS really integrate _all_ the reflections, or only a subset (say, every second reflection)? Check out http://strucbio.biologie.uni-konstanz.de/ccp4wiki/index.php/Refinement#what… If, after thorough attempts, you fail to find the solution, upload your current model, sequence and raw data frames to a Dropbox folder and post the link here - there may be people who succeed in processing the data nicely, or otherwise can identify the problem based on the data (rather than based on your description only). HTH, Kay Am 18.04.14 01:25, schrieb phenixbb-request(a)phenix-online.org: > Date: Thu, 17 Apr 2014 16:25:00 -0700 > From: Yarrow Madrona<amadrona(a)uci.edu> > To: PHENIX user mailing list<phenixbb(a)phenix-online.org> > Subject: [phenixbb] Stalled refinement > Message-ID: > <CAMHjG6bPE4q1xWidpE2VwFMJ9qLSqjtLRuLMM1ef9vWBHBfZKg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hello, > > I using the latest stable build of phenx.refine (1.8.4) I recently > collected data, processed and obtained an MR solution using phaser. I am > stuck trying to refine with an Rfree sitting at 40% > > I really want to know if the high Rfree is due to poor data quality or if > non-crystallographic symmetry involving a near perfect two fold rotation > between the two molecules in the ASU could somehow impede refinement. Stats > and other information is below. Thank you for any help you can give. > > -Yarrow > > > Visually, the quality of the data is marginal at best (streaky/ice rings in > many frames) despite good processing stats from XDS. Processing with mosflm > or HKL2000 managed to index but failed pretty bad in integration and > scaling. > > Phaser gave high TFZ scores for 2 molecules in the asu (see below). > > Density for a cholesterol like ligand shows up even though not present in > the search model. > > MolRep Self rotation shows rotational symmetry. > https://www.dropbox.com/s/2zsajl5o091k50r/CYP142A2-032814_21_rf%20copy.pdf > > The 2 molecules in the ASU are related by almost a 2 fold rotation: > > Rotation matrix for chain A to chain B: > > new_ncs_group > rota_matrix 1.0000 0.0000 0.0000 > rota_matrix 0.0000 1.0000 0.0000 > rota_matrix 0.0000 0.0000 1.0000 > tran_orth 0.0000 0.0000 0.0000 > > center_orth 15.2016 0.5245 33.7070 > > rota_matrix -0.9860 -0.1636 -0.0309 > rota_matrix -0.1659 0.9511 0.2605 > rota_matrix -0.0132 0.2620 -0.9650 > tran_orth 34.3310 -24.0033 107.0457 > > center_orth 15.7607 7.2426 77.7512 > > RMSD, B onto A = 0.0007 after phaser > RMSD, B onto A = 0.347 after one round of refinement in phenix > > > Refinement using aniostropically corrected data (ucla web server: > Services.mbi.ucla.edu/anisoscale) did not improve the Rfree in refinement. > > > Statistics are listed below: > > UNIT CELL: 51.487 88.923 89.592 90 97.15 90 P21 > > RESOLUTION NUMBER OF REFLECTIONS COMPLETENESS R-FACTOR R-FACTOR > COMPARED I/SIGMA R-meas CC(1/2) Anomal SigAno Nano > LIMIT OBSERVED UNIQUE POSSIBLE OF DATA observed expected > Corr > > 5.99 8280 1927 2087 92.3% 3.1% 3.3% > 8246 35.09 3.5% 99.8* 20* 0.909 1296 > 4.30 14606 3401 3487 97.5% 3.3% 3.5% > 14580 33.37 3.8% 99.9* 11* 0.843 2273 > 3.53 17961 4244 4445 95.5% 3.8% 3.9% > 17944 31.11 4.4% 99.8* -2 0.789 2721 > 3.06 21954 5068 5221 97.1% 4.9% 5.1% > 21933 24.81 5.6% 99.7* -2 0.780 3455 > 2.74 25741 5830 5933 98.3% 7.6% 7.6% > 25713 18.88 8.6% 99.5* -2 0.782 4165 > 2.51 27859 6311 6483 97.3% 10.8% 10.8% > 27824 14.06 12.3% 99.1* -2 0.774 4385 > 2.32 31336 6979 7084 98.5% 14.9% 15.3% > 31296 10.49 16.8% 98.5* -4 0.748 5095 > 2.17 32396 7347 7567 97.1% 22.3% 22.7% > 32341 7.46 25.4% 97.3* -7 0.728 5055 > 2.05 32254 7339 8047 91.2% 33.1% 33.5% > 32075 5.06 37.5% 94.8* -6 0.724 5155 > total 212387 48446 50354 96.2% 7.8% 7.9% > 211952 16.57 8.8% 99.7* -3 0.768 33600 > > Processing with mosflm or HKL2000 managed to index but failed pretty bad in > integration and scaling. > > > Phaser: > > SOLU SET RFZ=27.5 TFZ=24.2 PAK=0 LLG=1711 RF++ TFZ=64.6 PAK=0 LLG=3610 > LLG=4865 >

2 2

Re: [phenixbb] Stalled refinement
by Yarrow Madrona 18 Apr '14

18 Apr '14

There is no significant peaks for translational NCS. I also didn't see anything in the patterson map. However, the Multivariate Z score L-test gives 6.218. Also the observed Centric reflections are more intense than they should be but I don't suspect twinning in a monoclinic space group. -Yarrow On Thu, Apr 17, 2014 at 4:37 PM, Paul Adams <pdadams(a)lbl.gov> wrote: > > What does triage say about translation NCS? > > > On Thu, Apr 17, 2014 at 4:25 PM, Yarrow Madrona <amadrona(a)uci.edu> wrote: > >> Hello, >> >> I using the latest stable build of phenx.refine (1.8.4) I recently >> collected data, processed and obtained an MR solution using phaser. I am >> stuck trying to refine with an Rfree sitting at 40% >> >> I really want to know if the high Rfree is due to poor data quality or if >> non-crystallographic symmetry involving a near perfect two fold rotation >> between the two molecules in the ASU could somehow impede refinement. Stats >> and other information is below. Thank you for any help you can give. >> >> -Yarrow >> >> >> Visually, the quality of the data is marginal at best (streaky/ice rings >> in many frames) despite good processing stats from XDS. Processing with >> mosflm or HKL2000 managed to index but failed pretty bad in integration and >> scaling. >> >> Phaser gave high TFZ scores for 2 molecules in the asu (see below). >> >> Density for a cholesterol like ligand shows up even though not present in >> the search model. >> >> MolRep Self rotation shows rotational symmetry. >> https://www.dropbox.com/s/2zsajl5o091k50r/CYP142A2-032814_21_rf%20copy.pdf >> >> The 2 molecules in the ASU are related by almost a 2 fold rotation: >> >> Rotation matrix for chain A to chain B: >> >> new_ncs_group >> rota_matrix 1.0000 0.0000 0.0000 >> rota_matrix 0.0000 1.0000 0.0000 >> rota_matrix 0.0000 0.0000 1.0000 >> tran_orth 0.0000 0.0000 0.0000 >> >> center_orth 15.2016 0.5245 33.7070 >> >> rota_matrix -0.9860 -0.1636 -0.0309 >> rota_matrix -0.1659 0.9511 0.2605 >> rota_matrix -0.0132 0.2620 -0.9650 >> tran_orth 34.3310 -24.0033 107.0457 >> >> center_orth 15.7607 7.2426 77.7512 >> >> RMSD, B onto A = 0.0007 after phaser >> RMSD, B onto A = 0.347 after one round of refinement in phenix >> >> >> Refinement using aniostropically corrected data (ucla web server: >> Services.mbi.ucla.edu/anisoscale) did not improve the Rfree in >> refinement. >> >> >> Statistics are listed below: >> >> UNIT CELL: 51.487 88.923 89.592 90 97.15 90 P21 >> >> RESOLUTION NUMBER OF REFLECTIONS COMPLETENESS R-FACTOR R-FACTOR >> COMPARED I/SIGMA R-meas CC(1/2) Anomal SigAno Nano >> LIMIT OBSERVED UNIQUE POSSIBLE OF DATA observed expected >> Corr >> >> 5.99 8280 1927 2087 92.3% 3.1% 3.3% >> 8246 35.09 3.5% 99.8* 20* 0.909 1296 >> 4.30 14606 3401 3487 97.5% 3.3% 3.5% >> 14580 33.37 3.8% 99.9* 11* 0.843 2273 >> 3.53 17961 4244 4445 95.5% 3.8% 3.9% >> 17944 31.11 4.4% 99.8* -2 0.789 2721 >> 3.06 21954 5068 5221 97.1% 4.9% 5.1% >> 21933 24.81 5.6% 99.7* -2 0.780 3455 >> 2.74 25741 5830 5933 98.3% 7.6% 7.6% >> 25713 18.88 8.6% 99.5* -2 0.782 4165 >> 2.51 27859 6311 6483 97.3% 10.8% 10.8% >> 27824 14.06 12.3% 99.1* -2 0.774 4385 >> 2.32 31336 6979 7084 98.5% 14.9% 15.3% >> 31296 10.49 16.8% 98.5* -4 0.748 5095 >> 2.17 32396 7347 7567 97.1% 22.3% 22.7% >> 32341 7.46 25.4% 97.3* -7 0.728 5055 >> 2.05 32254 7339 8047 91.2% 33.1% 33.5% >> 32075 5.06 37.5% 94.8* -6 0.724 5155 >> total 212387 48446 50354 96.2% 7.8% 7.9% >> 211952 16.57 8.8% 99.7* -3 0.768 33600 >> >> Processing with mosflm or HKL2000 managed to index but failed pretty bad >> in integration and scaling. >> >> >> Phaser: >> >> SOLU SET RFZ=27.5 TFZ=24.2 PAK=0 LLG=1711 RF++ TFZ=64.6 PAK=0 LLG=3610 >> LLG=4865 >> >> >> _______________________________________________ >> phenixbb mailing list >> phenixbb(a)phenix-online.org >> http://phenix-online.org/mailman/listinfo/phenixbb >> >> > > > -- > Paul Adams > Deputy Division Director, Physical Biosciences Division, Lawrence Berkeley > Lab > Division Deputy for Biosciences, Advanced Light Source, Lawrence Berkeley > Lab > Adjunct Professor, Department of Bioengineering, U.C. Berkeley > Vice President for Technology, the Joint BioEnergy Institute > Laboratory Research Manager, ENIGMA Science Focus Area > > Building 64, Room 248 > Tel: 1-510-486-4225, Fax: 1-510-486-5909 > http://cci.lbl.gov/paul > > Lawrence Berkeley Laboratory > 1 Cyclotron Road > BLDG 64R0121 > Berkeley, CA 94720, USA. > > Executive Assistant: Louise Benvenue [ LBenvenue(a)lbl.gov ][ 1-510-495-2506 > ] >

3 4

DNA basepairing restraint refinement
by 李翔 18 Apr '14

18 Apr '14

Hi, I am working my low resolution data (6A) by MR and met a problem about DNA basepairing during refinement. I think so far everything looks OK except the bases flipped during the refinement. I added basepairing restraint for all bases, however, seems not help too much. Does anyone have experience on that? Sincerely, Xiang -- Li Xiang Department of chemistry, Purdue University Email：lixiang1642(a)gmail.com

3 2

Stalled refinement
by Yarrow Madrona 17 Apr '14

17 Apr '14

Hello, I using the latest stable build of phenx.refine (1.8.4) I recently collected data, processed and obtained an MR solution using phaser. I am stuck trying to refine with an Rfree sitting at 40% I really want to know if the high Rfree is due to poor data quality or if non-crystallographic symmetry involving a near perfect two fold rotation between the two molecules in the ASU could somehow impede refinement. Stats and other information is below. Thank you for any help you can give. -Yarrow Visually, the quality of the data is marginal at best (streaky/ice rings in many frames) despite good processing stats from XDS. Processing with mosflm or HKL2000 managed to index but failed pretty bad in integration and scaling. Phaser gave high TFZ scores for 2 molecules in the asu (see below). Density for a cholesterol like ligand shows up even though not present in the search model. MolRep Self rotation shows rotational symmetry. https://www.dropbox.com/s/2zsajl5o091k50r/CYP142A2-032814_21_rf%20copy.pdf The 2 molecules in the ASU are related by almost a 2 fold rotation: Rotation matrix for chain A to chain B: new_ncs_group rota_matrix 1.0000 0.0000 0.0000 rota_matrix 0.0000 1.0000 0.0000 rota_matrix 0.0000 0.0000 1.0000 tran_orth 0.0000 0.0000 0.0000 center_orth 15.2016 0.5245 33.7070 rota_matrix -0.9860 -0.1636 -0.0309 rota_matrix -0.1659 0.9511 0.2605 rota_matrix -0.0132 0.2620 -0.9650 tran_orth 34.3310 -24.0033 107.0457 center_orth 15.7607 7.2426 77.7512 RMSD, B onto A = 0.0007 after phaser RMSD, B onto A = 0.347 after one round of refinement in phenix Refinement using aniostropically corrected data (ucla web server: Services.mbi.ucla.edu/anisoscale) did not improve the Rfree in refinement. Statistics are listed below: UNIT CELL: 51.487 88.923 89.592 90 97.15 90 P21 RESOLUTION NUMBER OF REFLECTIONS COMPLETENESS R-FACTOR R-FACTOR COMPARED I/SIGMA R-meas CC(1/2) Anomal SigAno Nano LIMIT OBSERVED UNIQUE POSSIBLE OF DATA observed expected Corr 5.99 8280 1927 2087 92.3% 3.1% 3.3% 8246 35.09 3.5% 99.8* 20* 0.909 1296 4.30 14606 3401 3487 97.5% 3.3% 3.5% 14580 33.37 3.8% 99.9* 11* 0.843 2273 3.53 17961 4244 4445 95.5% 3.8% 3.9% 17944 31.11 4.4% 99.8* -2 0.789 2721 3.06 21954 5068 5221 97.1% 4.9% 5.1% 21933 24.81 5.6% 99.7* -2 0.780 3455 2.74 25741 5830 5933 98.3% 7.6% 7.6% 25713 18.88 8.6% 99.5* -2 0.782 4165 2.51 27859 6311 6483 97.3% 10.8% 10.8% 27824 14.06 12.3% 99.1* -2 0.774 4385 2.32 31336 6979 7084 98.5% 14.9% 15.3% 31296 10.49 16.8% 98.5* -4 0.748 5095 2.17 32396 7347 7567 97.1% 22.3% 22.7% 32341 7.46 25.4% 97.3* -7 0.728 5055 2.05 32254 7339 8047 91.2% 33.1% 33.5% 32075 5.06 37.5% 94.8* -6 0.724 5155 total 212387 48446 50354 96.2% 7.8% 7.9% 211952 16.57 8.8% 99.7* -3 0.768 33600 Processing with mosflm or HKL2000 managed to index but failed pretty bad in integration and scaling. Phaser: SOLU SET RFZ=27.5 TFZ=24.2 PAK=0 LLG=1711 RF++ TFZ=64.6 PAK=0 LLG=3610 LLG=4865

1 0

geometry_regularization
by jp d 15 Apr '14

15 Apr '14

hi, the geometry_regularization option is gone from pdbtools in 1.8.4-1496 it looks like it works in 1.8.1, is that version ok to use ? thanks jpd

2 1

homology models in sculptor
by "Weiergräber, Oliver H." 15 Apr '14

15 Apr '14

Hello, I am using phenix.sculptor for modification of a homology model in a challenging case of molecular replacement. The input model is complete (except at the termini), i.e. it exactly matches the target sequence as defined in the alignment file. In this scenario, are there any caveats to consider with individual options in sculptor? Specifically, a quick test seems to indicate that the Schwarzenbacher algorithm for side chain pruning does not work, i.e. not a single atom is removed from the model, whereas the alternative "similarity" option leads to deletion of a few hundred atoms. I'm using sculptor from the command line, and the log file indicates my input is interpreted correctly. Best regards Oliver ================================================ PD Dr. Oliver H. Weiergräber Institute of Complex Systems ICS-6: Structural Biochemistry Tel.: +49 2461 61-2028 Fax: +49 2461 61-9540 ================================================ ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------ Forschungszentrum Juelich GmbH 52425 Juelich Sitz der Gesellschaft: Juelich Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498 Vorsitzender des Aufsichtsrats: MinDir Dr. Karl Eugen Huthmacher Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender), Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt, Prof. Dr. Sebastian M. Schmidt ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------

2 1

recovering the files from project directory
by Bishwa Subedi 14 Apr '14

14 Apr '14

Hi, I tried to use phenix in my personal computer for small checks and convenient use. I accidentally happened to make my project directory /user/XXX/Documents. Even though it was not the intended folder for running Phenix and later changed it to some other folders, I noticed that all my documents in that folder has disappeared (folder is empty). I do not see the files in trash folder as well. I assume this happened because of selecting documents as the project directory and phenix empties the folder before use, am I correct? If so is there any way to recover those files? Thanking you in advance. Best regards, Bishwa

2 1

PhD position in Structural Biology in Norway
by Hans Petter Hersleth 10 Apr '14

10 Apr '14

Dear all, A 4-year PhD position in Structural Biology starting August 2014 is available at University of Oslo, Department of Biosciences, Section for Biochemistry and Molecular Biology. The position is funded by the Research Council of Norway and the University of Oslo. The project is dealing with different redox proteins (haem, flavin, iron-sulfur, and di-metal proteins) with a focus on flavodoxins, ferredoxins, ferredoxin/flavodoxin reductases and redox partner enzymes. The project is in the field of structural biology and biochemistry with a strong focus on protein crystallography in combination with other biochemical and biophysical methods including single-crystal spectroscopy. More information about the project, position and application procedure is found on the website: http://uio.easycruit.com/vacancy/1149343/96323?iso=no Applicants must hold a Master’s degree or equivalent in protein crystallography, structural biology, biochemistry or molecular biology. The successful applicant should have skills and experience in working with proteins. It would be advantageous with hands-on experience within topics like cloning, protein expression, purification, crystallisation, protein crystallography, spectroscopy, protein-protein interactions, enzyme kinetics, redox- and co-factor proteins and teaching. Candiates without a Master's Degree have until 30 June, 2014 to complete the final exam. Application deadline is 20th April 2014 through the website: http://uio.easycruit.com/vacancy/1149343/96323?iso=no For further information please contact: Dr. Hans-Petter Hersleth, (h.p.hersleth(a)ibv.uio.no) ---------------------------------------------------------------------------------------------- Hans-Petter Hersleth, PhD Department of Biosciences, University of Oslo Section for Biochemistry and Molecular Biology P.O.Box 1066 Blindern, NO-0316 Oslo, Norway http://www.mn.uio.no/ibv/personer/vit/hphersle/index.html -----------------------------------------------------------------------------------------------

1 0

enforce ncs on ligand
by Garboczi, David (NIH/NIAID) [E] 10 Apr '14

10 Apr '14

I am not able to enforce ncs on two copies of a ligand. The ligand is largish, flavin-like. How do I use the information that the two ligands are identical in Phenix-refine. thanks, Dave

1 0