- phenixbb - phenix-online.org

citation
by Sneha Rangarajan 21 Apr '15

21 Apr '15

Hello, What is the correct way to cite Phenix MRage? Thanks, Sneha

2 2

Standard settings for map generation in phenix.refine
by Tristan Croll 21 Apr '15

21 Apr '15

Hi all, In the phenix.refine GUI, the default options for the maps auto-generated in Coot include the R-free set in the map coefficients. Is this the best choice? It's fairly natural for the user to immediately inspect/correct their structure using the helpfully-provided Coot window - which, as per a recent discussion thread on this list, can easily lead to over-fitting. I suspect I've been looking at such a case over the last week or so - a mid-3A structure refined in Phenix with an amazingly low Rfree (0.234) and Rfree-Rwork (~0.016), despite clear (albeit non-disastrous) errors in a number of loops, and moderate-poor statistics in structural quality metrics. Tellingly, the Rfree goes up quite substantially upon re-refinement after correcting these issues. If maps generated with the Rfree set included should only ever be used for final display, wouldn't it be better to have them excluded by default? Best regards, Tristan Tristan Croll Lecturer Faculty of Health School of Biomedical Sciences Institute of Health and Biomedical Engineering Queensland University of Technology 60 Musk Ave Kelvin Grove QLD 4059 Australia +61 7 3138 6443 This email and its attachments (if any) contain confidential information intended for use by the addressee and may be privileged. We do not waive any confidentiality, privilege or copyright associated with the email or the attachments. If you are not the intended addressee, you must not use, transmit, disclose or copy the email or any attachments. If you receive this email by mistake, please notify the sender immediately and delete the original email.

2 1

on importing CIF structure factors and cutting out density
by Smith Liu 21 Apr '15

21 Apr '15

Dear All, By importing CIF structure factors of the Phenix graphical interface, I converted a CIF file to a mtz file. But when I tried to cutting out the density by Phenix with the converted mtz file, it request the map labels, which the converted mtz file seems does not have. Will you please let me know how to have the issue settles? Smith

2 1

phenix refinement of cryoEM data
by Ali Malay 17 Apr '15

17 Apr '15

Dear all, I am a relative newcomer to Phenix. I have a large multimeric protein structure docked into an electron density map, and I would like to further refine it by rigid-body refinement using Phenix. Is this a realistic strategy? I have made some attempts, first by converting the .mrc map file to .mtz as outlined here: https://www.phenix-online.org/documentation/reference/map_to_structure_fact… <https://www.phenix-online.org/documentation/reference/map_to_structure_fact…> Then I tried to refine using rigid body refinement in Phenix. However, the program quits but doesn’t really tell me why. Here’s the last part of the log file: Number of unique models: 24 Time building chain proxies: 36.85, per 1000 atoms: 0.26 Number of scatterers: 142296 At special positions: 0 Unit cell: (342, 342, 342, 90, 90, 90) Space group: P 1 (No. 1) Number of sites at special positions: 0 Number of scattering types: 4 Type Number sf(0) S 264 16.00 O 27720 8.00 N 25872 7.00 C 88440 6.00 sf(0) = scattering factor at diffraction angle 0. Writing MTZ file: /Users/xxx/Documents/Phenix/TEST/Refine_1/Test_refine_data.mtz Sorry Can anyone give me any ideas as to what went wrong? Also, is there a better way to do this? Thanks very much in advance!! A.M.

2 1

find difference peaks
by Alejandro Virrueta 15 Apr '15

15 Apr '15

Hello, I'm working on a small project, and need some feedback. I am trying to rebuild methionine side-chains by looking at the difference peaks for a given Fo-Fc map. I envision a process as follows: 1. Delete the MET side-chain of a PDB file 2. Refine structure to get Fo-Fc map 3. Get a list of the peak positions relative to the coordinates of the PDB file I used 4. Filter list by keeping peaks near the MET C alpha/beta PDB coordinate. 5. Try to rebuild side-chain after anchoring the sulfur atom (assuming sulfur is located at the highest peak and within some distance to C beta) What functions should I use to achieve step 3? I am also trying to implement this process within the ringer program (phenix/cctbx_project/mmtbx/command_line/ringer.py). If anyone is familiar with this, what commands would work best within this ringer program? i.e. what functions can operate on difference_map (which is sampled by a point using tricubic_interpolation under 'def sample_angle')? I hope this makes some sense to someone. Thanks! Alex

2 1

reflections file editor
by Almudena Ponce Salvatierra 14 Apr '15

14 Apr '15

Dear all, I would like to merge two datasets containing anomalous signal. If have done so earlier for native data within phenix in the reflections editor by selecting the arrays corresponding to FP and SIGFP and then running the program. However when I try to do so for the anomalous datasets it writes FP SIGFP and FP2 SIGFP2 instead or merging them, so it does with the anomalous signal... so I guess I have basically only one file containing two datasets but not a merged dataset. How can I solve it? Would it be possible, on the other hand, to merge a dataset with anomalous signal with a native one? The intention behind is to extend the resolution to the one of the native data. Best, Almudena -- Almudena Ponce-Salvatierra Macromolecular crystallography and Nucleic acid chemistry Max Planck Institute for Biophysical Chemistry Am Fassberg 11 37077 Göttingen Germany

3 2

sugar puckering refinement with phenix refine
by Almudena Ponce Salvatierra 13 Apr '15

13 Apr '15

Dear all, does anyone know how phenix.refine deals with the sugar puckering of an RNA or a DNA strand? Does it refine it? Or does it leave it as it was built? Thank you very much in advance. Best wishes, Almudena -- Almudena Ponce-Salvatierra Macromolecular crystallography and Nucleic acid chemistry Max Planck Institute for Biophysical Chemistry Am Fassberg 11 37077 Göttingen Germany

2 1

Link NGA and THR
by Cory Brooks 13 Apr '15

13 Apr '15

Hello! I am refining a structure with O-link glycosylation (GalNAc linked to Thr). Phenix seems to remove the link during refinement. Can anyone suggest a solution that will maintain the bond during refinement? Regards, Cory Cory Brooks,Ph.D.

3 2

elbow-readyset
by Tarek DawoD 13 Apr '15

13 Apr '15

Dear All if i have pdb file for CdCl2, how could i generate cif file (to use later in phenix.refine) from that using readyset or elbow or any other tool.i could not find 3 letter could for CdCl2. COMPND UNNAMED AUTHOR GENERATED BY OPEN BABEL 2.3.1 HETATM 1 CD LIG 1 0.994 8.428 20.546 1.00 0.00 Cd HETATM 2 CL1 LIG 1 -0.441 6.507 20.373 1.00 0.00 Cl HETATM 3 CL2 LIG 1 3.190 7.731 21.231 1.00 0.00 Cl END Thank you for Help.regardsTK_DawoD

3 2

Submit your abstract for the ACA Annual meeting in Philadelphia July 25-29, 2015
by Terwilliger, Thomas Charles 13 Apr '15

13 Apr '15

Hi Phenix users! You are invited to the ACA meeting in Philadelphia! Abstracts are still being accepted (see the invitation below). All the best, Tom T Tom Terwilliger Vice President, ACA Abstracts still being accepted ACA 2015 Meeting - July 25-29 Philadelphia, PA Is this email not displaying correctly? View it in your browser<http://us2.campaign-archive2.com/?u=3e43dd9d1724b97d2bc286881&id=0f524b9d2c…>. [https://gallery.mailchimp.com/3e43dd9d1724b97d2bc286881/images/2a8238a9-d30…] [http://www.amercrystalassn.org/2015-mtg-homepage]<http://amercrystalassn.us2.list-manage.com/track/click?u=3e43dd9d1724b97d2b…> ABSTRACT SUBMISSION DEADLINE IS EXTENDED ACA Annual Meeting • Philadelphia, PA • July 25 - 29, 2015 Submit abstract now to be considered for an oral presentation. Once all the lectures are scheduled, abstracts will continue to be accepted for poster presentations. [https://gallery.mailchimp.com/3e43dd9d1724b97d2bc286881/images/21952137-733…] Exhibit Show<http://amercrystalassn.us2.list-manage.com/track/click?u=3e43dd9d1724b97d2b…> First-time exhibitors receive 25% discount Discount rates for Not-for profits Corporate Members receive an additional discount Coffee breaks & poster sessions held in the exhibit hall to offer multiple opportunities to reach your target audience Your website linked on the meeting page Free listing in ACA RefleXions and Program & Show Guides Special sponsorships for Exhibitors only [https://gallery.mailchimp.com/3e43dd9d1724b97d2bc286881/images/d9f63f39-b8b…] Call for Papers:<http://amercrystalassn.us2.list-manage.com/track/click?u=3e43dd9d1724b97d2b…> 40% of talks selected from contributed abstracts No abstract submission fee Lower registration fees for members Sessions for students & young scientists on career directions, reviewer practices & more Full scientific program:www.AmerCrystalAssn.org<http://amercrystalassn.us2.list-manage1.com/track/click?u=3e43dd9d1724b97d2…> [https://gallery.mailchimp.com/3e43dd9d1724b97d2bc286881/images/961e8c70-86c…] Registration<http://amercrystalassn.us2.list-manage.com/track/click?u=3e43dd9d1724b97d2b…>: Join or pay membership dues and save on Registration fees Corporate Members receive advertising and exhibiting discounts Early bird rates until May 31 Online registration now open<http://amercrystalassn.us2.list-manage2.com/track/click?u=3e43dd9d1724b97d2…> follow on Twitter<Twitter%20Account%20not%20yet%20Authorized> | friend on Facebook | forward to a friend<http://us2.forward-to-friend.com/forward?u=3e43dd9d1724b97d2bc286881&id=0f5…> Copyright © 2014, AmericanCrystallographicAssn. All rights reserved. Our mailing address is: aca(a)hwi.buffalo.edu<mailto:[email protected]> ACA, PO Box 96, Buffalo, NY 14205 [Email Marketing Powered by MailChimp]<http://www.mailchimp.com/monkey-rewards/?utm_source=freemium_newsletter&utm…> unsubscribe from this list<http://amercrystalassn.us2.list-manage.com/unsubscribe?u=3e43dd9d1724b97d2b…> | update subscription preferences<http://amercrystalassn.us2.list-manage.com/profile?u=3e43dd9d1724b97d2bc286…>

1 0