- phenixbb - phenix-online.org

phenix.sort_heteroatoms produced duplicated residue number
by luzuok 12 Jan '16

12 Jan '16

Dear phenixbb, When I use phenix.sort_hetero_atoms to resort my pdb, there are duplicated residue number of water and aa in the output pdb. Is this a bug? As there are many number gaps water, how can I fix it? Best wishes! Lu -- 卢作焜南开大学新生物站A202 Lu Zuokun, Ph.D. Candidate College of Life Science, Nankai University

1 0

pdbtools model_statistics: average B-factors
by wtempel 11 Jan '16

11 Jan '16

Hello, are the mean B-factors in the "ADP statistics" table occupancy-weighted, or perhaps weighted in any other way? If so, please could you provide the formula. Thank you. Wolfram Tempel

3 2

phenix.refine with reference model
by Falk, Sebastian 08 Jan '16

08 Jan '16

Hi! I am currently building a 3.3 A structure of a large protein. I do have a reference model at much better resolution that has 58% sequence identity and 77% similarity. The structures are quite similar, there are only a few regions with insertions. However, phenix.refine does ‘accept’ the reference model and thus creates no torsion restraints. I also tried to run ProSmart in CCP4 but there the cut-off for the reference model is 75% sequence identity. I could not find any threshold for phenix.refine though. I am happy for any suggestion or tip how to include the reference model even though the sequence identity is not as high. Thank a lot. Sebastian Sebastian Falk Max-Planck-Institute for Biochemistry Structural Cell Biology Am Klopferspitz 18 D-82152 Martinsried Germany sfalk(a)biochem.mpg.de

2 2

Generate sequence files of homodimer protein or double strand DNA for phaser MR
by Alex Lee 08 Jan '16

08 Jan '16

Dear Phenixbb members, I am using Phaser MR for solving a homodimer DNA binding protein with dsDNA complex structure. I'd like to use sequence file rather then molecular weight in the component definition of ASU. As there are solved homodimer protein structures (amino acid identity 100%) on PDB, I can download seq file (fasta form) from PDB webpage, but the seq file is only for one protein chain. I also tried online tools like "make sequence from PDB file" (http://swift.cmbi.ru.nl/servers/html/soupir.html), when I put the protein dimer bound to dsDNA pdb into the online tool, the outtput pir sequence file only shows a single protein chain and dna which dose not seems like two strands, rather then just put two 23base dna together for a 46 base length single strand DNA. I am asking is there a way to generate sequence file for a homodimer and dsDNA? or I have to generate sequence file for each chain separately (there will be four sequence files in this case, two protein chains and two dna chains)? Thanks. Alex Alex

2 1

coot generate symmetry mates like pymol
by Xiao Lei 08 Jan '16

08 Jan '16

Hi Phenixbb members, 1. Is there a function in coot which can generate symmetry mates like pymol (action--> generate symmetry mates)? I know in coot there is a "Draw---> Cell&Symmetry" function, but it seems the display results could not display my crystal packing like pymol. 2. In pymol, is there a button which just display structure in one unit cell? Thanks. Xiao

1 0

unwanted N/Q/H flipping in PHENIX.REFINE
by Bernhard Loll 05 Jan '16

05 Jan '16

Dear all, I am currently refining a 1.9 A structure with PHENIX 1.10.1-2155. The problem I am facing is the following: Running the Molprobity server, it suggests me to correct a couple of N/Q/H flips. I perform the flips re-run PHENIX.REFINE with “Automatically correct N/Q/H errors” not ticked. The log file confirms the selection with nqh_flips = False. Nevertheless PHENIX.REFINE again flips these residues and the output PDB file has all previously flipped residues “re-flipped” in comparison to the input PDB file. I am very confident that the automatically flips performed by PHENIX.REFINE (REDEUCE) are wrong, since I have two metal binding sites. Why PHENIX.REFINE rotates side chains by 180 degree even though nqh_flips were set to false? Any help is appreciated. Cheers, Bernhard Dr. Bernhard Loll Freie Universitaet Berlin Fachbereich Biologie, Chemie, Pharmazie Institut fuer Chemie und Biochemie AG Strukturbiochemie Takustr. 6 D-14195 Berlin Germany Phone: +49 (0) 30 838-57348 Fax: +49 (0) 30 838-454936 Email: loll(a)chemie.fu-berlin.de Homepage: http://www.bcp.fu-berlin.de/chemie/bc/ag/agwahl/

3 3

Project info lost after a disk crash
by hli 04 Jan '16

04 Jan '16

Hi, The hard drive of our major Linux computer crashed recently. After installing a new disk and recovering all the data in the damaged disk I lost all the project information in PHENIX GUI home page. I noticed that under .phenix directory there are files like project_db.pkl, but do not know how to retrieve the old project info into the GUI. Thanks in advance for your help. Huiying Dept. MB&B UC Irvine

2 2

Re: [phenixbb] Modifications for Ca-binding site
by Nigel Moriarty 30 Dec '15

30 Dec '15

Jacob Once again Boaz is leading you in the correct direction. You did send me a *.metals.edits file. You just need to change the ideal distances in this file. On another point, I ran a refinement with your inputs and the values don't seem a long way off. However, I'd wait for Pavel to take a look because the density around the Calcium ion itself seems unusual. Cheers Nigel --- Nigel W. Moriarty Building 33R0349, Physical Biosciences Division Lawrence Berkeley National Laboratory Berkeley, CA 94720-8235 Phone : 510-486-5709 Email : NWMoriarty(a)LBL.gov Fax : 510-486-5909 Web : CCI.LBL.gov On Wed, Dec 30, 2015 at 6:27 AM, Boaz Shaanan <bshaanan(a)bgu.ac.il> wrote: > Hi Jacob, > > My guess is that answer (or hint) is here (taken from this link : > https://www.phenix-online.org/documentation/faqs/refine.html#targets-and-re…): > > > *I have ions very close to water molecules/protein atoms, and > phenix.refine keeps tring to move them apart. How can I prevent this?* > > Use phenix.ready_set or *phenix.metal_coordination* to generate custom > bond (and optionally, bond angle) restraints, which will be output to a > parameter file ending in ".edits". If you are using the PHENIX GUI, there > is a toolbar button for ReadySet in the phenix.refine interface, which will > automatically load the output files for use in phenix.refine. > > I have not used it myself but I assume that the sigmas for the restraints > would be in the *.edits files that you'll generate. > > Hope this helps. > > Boaz > > > > > > > > > > *Boaz Shaanan, Ph.D. Dept. of Life > Sciences Ben-Gurion University of the > Negev Beer-Sheva > 84105 > Israel > E-mail: > bshaanan(a)bgu.ac.il <bshaanan(a)bgu.ac.il> Phone: 972-8-647-2220 Skype: > boaz.shaanan Fax: 972-8-647-2992 or 972-8-646-1710 * > > > > > > ------------------------------ > *From:* Keller, Jacob [kellerj(a)janelia.hhmi.org] > *Sent:* Wednesday, December 30, 2015 4:09 PM > *To:* Nigel Moriarty > *Cc:* בעז שאנן; phenixbb(a)phenix-online.org > *Subject:* RE: [phenixbb] Modifications for Ca-binding site > > How does one change the ideal bond length/sigma in Phenix? > > > > JPK > > > > *From:* Nigel Moriarty [mailto:[email protected]] > *Sent:* Tuesday, December 29, 2015 10:12 AM > *To:* Keller, Jacob > *Cc:* Boaz Shaanan; phenixbb(a)phenix-online.org > *Subject:* Re: [phenixbb] Modifications for Ca-binding site > > > > Jacob > > > > Boaz has some sage advice. I recommend not excluding the Ca-O coordination > but changing the ideal to better reflect the distances in your files. > > > > PS I'd also like the PDB files, directly, so as not to put noise on the > list. > > > Cheers > > > > Nigel > > > > --- > > Nigel W. Moriarty > Building 33R0349, Physical Biosciences Division > Lawrence Berkeley National Laboratory > Berkeley, CA 94720-8235 > Phone : 510-486-5709 Email : NWMoriarty(a)LBL.gov > Fax : 510-486-5909 Web : CCI.LBL.gov > > > > On Tue, Dec 29, 2015 at 5:49 AM, Keller, Jacob <kellerj(a)janelia.hhmi.org> > wrote: > > Well, I think it's more of a data-vs-geometry battle, with the geometry > dragging in the side chains towards the calciums, and the data pulling them > out. When I real-space refine them in Coot, some of the Ca-O distances are > pretty different from the "ideal" values. Maybe I could just exclude them > from xyz refinement in Phenix after making sure they're correct in Coot? > I'll give that a shot. > > Kol tuv, > > Jacob > > > > > > -----Original Message----- > From: Boaz Shaanan [mailto:[email protected]] > Sent: Tuesday, December 29, 2015 7:52 AM > To: Keller, Jacob; phenixbb(a)phenix-online.org > Subject: RE: Modifications for Ca-binding site > > Hi Jacob, > > Sucking-up neighboring residues into the Calcium (or other heavier atoms) > density is a known issue. Turning-off the Ca-O or other distance restraints > around the Calcium is the last thing you want to do, in my experience. > You'd better check those distance restraints and verify that they're > compatible with the distances in other (preferably high resolution, of > course) structures with calcium binding sites similar to yours and then > make sure they're given the appropriate weight during refinement. That's my > view but Pavel will give you more advices I'm sure. > > Cheers, > > Boaz > > > Boaz Shaanan, Ph.D. > Dept. of Life Sciences > Ben-Gurion University of the Negev > Beer-Sheva 84105 > Israel > > E-mail: bshaanan(a)bgu.ac.il > Phone: 972-8-647-2220 Skype: boaz.shaanan > Fax: 972-8-647-2992 or 972-8-646-1710 > > > > > > ________________________________________ > From: phenixbb-bounces(a)phenix-online.org [ > phenixbb-bounces(a)phenix-online.org] on behalf of Keller, Jacob [ > kellerj(a)janelia.hhmi.org] > Sent: Tuesday, December 29, 2015 4:44 AM > To: phenixbb(a)phenix-online.org > Subject: [phenixbb] Modifications for Ca-binding site > > I am getting a lot of problems with my calcium binding sites--there is > clear density for the calciums and the protein side chains, but Phenix > keeps sucking the side chains out of their density towards the calciums and > also the calciums show some positive difference density, perhaps due to > too-high b-factors (or potentially partial occupancy by Na?). I think what > might work best is to turn off the Ca-O bond length restraints somehow, but > don't see where/how to do that. I tried releasing them from geometrical > restraints, but that made things worse, since things went haywire in the > sidechains themselves. > > Is it possible to make Phenix ignore the Ca-O bond distance restraints? > > JPK > > ******************************************* > Jacob Pearson Keller, PhD > Looger Lab/HHMI Janelia Research Campus > 19700 Helix Dr, Ashburn, VA 20147 > email: kellerj(a)janelia.hhmi.org > ******************************************* > > > > _______________________________________________ > phenixbb mailing list > phenixbb(a)phenix-online.org > http://phenix-online.org/mailman/listinfo/phenixbb > Unsubscribe: phenixbb-leave(a)phenix-online.org > > _______________________________________________ > phenixbb mailing list > phenixbb(a)phenix-online.org > http://phenix-online.org/mailman/listinfo/phenixbb > Unsubscribe: phenixbb-leave(a)phenix-online.org > > >

1 0

Modifications for Ca-binding site
by Keller, Jacob 30 Dec '15

30 Dec '15

I am getting a lot of problems with my calcium binding sites--there is clear density for the calciums and the protein side chains, but Phenix keeps sucking the side chains out of their density towards the calciums and also the calciums show some positive difference density, perhaps due to too-high b-factors (or potentially partial occupancy by Na?). I think what might work best is to turn off the Ca-O bond length restraints somehow, but don't see where/how to do that. I tried releasing them from geometrical restraints, but that made things worse, since things went haywire in the sidechains themselves. Is it possible to make Phenix ignore the Ca-O bond distance restraints? JPK ******************************************* Jacob Pearson Keller, PhD Looger Lab/HHMI Janelia Research Campus 19700 Helix Dr, Ashburn, VA 20147 email: kellerj(a)janelia.hhmi.org *******************************************

4 5

RSRZ in Phenix?
by Keller, Jacob 30 Dec '15

30 Dec '15

Dear Crystallographers, Is there any place in Phenix where RSRZ or a similar measure is shown? All the best, Jacob Keller ******************************************* Jacob Pearson Keller, PhD Looger Lab/HHMI Janelia Research Campus 19700 Helix Dr, Ashburn, VA 20147 email: kellerj(a)janelia.hhmi.org *******************************************

4 8