- phenixbb - phenix-online.org

Weird large continuous positive density blob
by Alex Lee 26 Apr '16

26 Apr '16

Dear Phenixbb members, I have a protein (90aa length) structure with 2.3A resolution and space group P21 refined to Rfree/R to around 0.27 / 0.20. There are 3 protein dimers in one asym unit. For two dimers (chain A, B, C, D), I can see clearly continuous electron density from residue 10 to residue 89. However for the third dimer (chain E and F), I can only see clearly continuous density between residue 10 to residue 72 and lost tracing of the main chain. I did see a large electron density blob close to the third dimer. ( https://goo.gl/photos/R1SaHPKS6VLfcesb7 ; Green is positive density at 3 sigma and blue is FWT PHWT at 2sigma and 1sigma ). I do not know how to explain this blob. It seems to me that this blob is unlikely protein fragments (some parts of the blob is so chunky). Even if it's true that it's certain protein fragment between residue 73 to residue 89 of chain E or chain F, then the position of this fragment is totally different from the position of its fragment counterparts in chain A,B, C,D. I assume NCS copies (in this case maybe 3 copies) should have the same morphology as to each other. It also seems to me that this density is not from my crystal growth or harvest conditions, which has: Bis-Tris; PEG3350; PEG400 and NaCl. I do not know if Phenix Autobuild could build this automatically for me, but I'll try this later. Thanks in advance for any input on this. The density link is: https://goo.gl/photos/R1SaHPKS6VLfcesb7

2 2

(no subject)
by Alexander Grishaev 26 Apr '16

26 Apr '16

agrishaev(a)ibbr.umd.edu

1 0

Re: [phenixbb] Coot does not start up with OS 10.11 El Capitan
by Benoît Masquida 26 Apr '16

26 Apr '16

Following the suggestion from Engin, I indicate which installer I used to install coot, Coot-0.8.3-pre-5936_64bit_10.11.3.pkg found on Bill Scott’s website. Installation creates the following executable in the /bin directory: -rwxr-xr-x 1 root wheel 535 24 mar 17:32 coot Chown does not change solve the problem that the graphics do not appear. Any help still welcome. Best, Benoit Benoît Masquida b.masquida(a)unistra.fr UMR 7156 GMGM tel: +33 3 68 85 14 81 fax: +33 3 68 85 13 65 IPCB - Plateforme de Biologie 4 Allée Konrad Roentgen 67081 STRASBOURG Cedex > Le 22 avr. 2016 à 17:40, Engin Özkan <eozkan(a)uchicago.edu> a écrit : > > As far as I know, there are no issues with Coot/Phenix on El Capitan. You may need to give more info on how you actually installed Coot (and which Coot you are invoking from Phenix, which you may have set in Coot path under Preferences->Graphics in Phenix). > Engin > > On 4/22/16 4:24 AM, Benoît Masquida wrote: >> Dear All, >> >> I re-installed Quartz as suggested. Then I have more verbose messages upon launching coot from the shell (See below). I don’t know if it is a general problem or a problem related to the configuration of my machine. >> >> Thanks. >> >> Benoit >> >> mmdcd-img2:bin B.Masquida$ ./coot >> INFO:: Reading coordinate file: /Library/Coot/share/coot/standard-residues.pdb >> PDB file /Library/Coot/share/coot/standard-residues.pdb has been read. >> Spacegroup: P 1 >> initalize graphics molecules...done. >> filter_fileselection_filenames_state () >> get_active_map_drag_flag () >> use_graphics_interface_state () >> INFO:: coot.py imported >> INFO:: coot_python initialized >> Running python script /Library/Coot/lib/python2.7/site-packages/coot/coot_load_modules.py >> Good Morning B.masquida, Welcome to Coot. 0.8.3-pre >> set_display_intro_string ("Good Morning B.masquida, Welcome to Coot. 0.8.3-pre") >> Coot Python Scripting GUI code found and loaded. >> Coot Python Scripting GUI code found and loaded. >> use_graphics_interface_state () >> filter_fileselection_filenames_state () >> get_active_map_drag_flag () >> coot-bin: Fatal IO error 35 (Resource temporarily unavailable) on X server /private/tmp/com.apple.launchd.cTrzTueRvK/org.macosforge.xquartz:0. >> coot-bin: Fatal IO error 35 (Resource temporarily unavailable) on X server /private/tmp/com.apple.launchd.cTrzTueRvK/org.macosforge.xquartz:0. >> mmdcd-img2:bin B.Masquida$ >> >> >> >> >> >> Benoît Masquida >> b.masquida(a)unistra.fr <mailto:[email protected]> >> UMR 7156 GMGM >> tel: +33 3 68 85 14 81 >> fax: +33 3 68 85 13 65 >> IPCB - Plateforme de Biologie >> 4 Allée Konrad Roentgen >> 67081 STRASBOURG Cedex >> >>> Le 21 avr. 2016 à 17:10, Xiao Lei < <mailto:[email protected]>xiaoleiusc(a)gmail.com <mailto:[email protected]>> a écrit : >>> >>> Hi BM, >>> >>> If it happens after you upgrade the system, you may try re-install the Xquartz. >>> >>> On Apr 21, 2016 6:48 AM, "Benoît Masquida" <b.masquida(a)unistra.fr <mailto:[email protected]>> wrote: >>> Dear Phenix, >>> >>> The graphic window of coot does not open either launch from the shell or from Phenix GUI. Has anyone experienced (and solved) this problem on El Capitan (from Apple)? >>> >>> Thanks for your help. >>> >>> BM >>> >>> -- >>> Benoît Masquida >>> b.masquida(a)unistra.fr <mailto:[email protected]> >>> UMR 7156 GMGM >>> tel: +33 3 68 85 14 81 <tel:%2B33%203%2068%2085%2014%2081> >>> fax: +33 3 68 85 13 65 <tel:%2B33%203%2068%2085%2013%2065> >>> IPCB - Plateforme de Biologie >>> 4 Allée Konrad Roentgen >>> 67081 STRASBOURG Cedex >>> >>> _______________________________________________ >>> phenixbb mailing list >>> phenixbb(a)phenix-online.org <mailto:[email protected]> >>> http://phenix-online.org/mailman/listinfo/phenixbb <http://phenix-online.org/mailman/listinfo/phenixbb> >>> Unsubscribe: phenixbb-leave(a)phenix-online.org <mailto:[email protected]> >> >> >> _______________________________________________ >> phenixbb mailing list >> phenixbb(a)phenix-online.org <mailto:[email protected]> >> http://phenix-online.org/mailman/listinfo/phenixbb <http://phenix-online.org/mailman/listinfo/phenixbb> >> Unsubscribe: phenixbb-leave(a)phenix-online.org <mailto:[email protected]>

2 1

Gordon Research Seminar this July
by Bradley Hintze 26 Apr '16

26 Apr '16

Attention Young scientist in crystallography and diffraction. Are you a young scientist interested in the methods in crystallography? Do you want to deepen your understanding of instrumentation, different diffraction methods, data processing, phasing, structure solution, etc.? The Gordon Research Seminar and Conference for Diffraction Methods happens July 16 - 22 (for both) at Bates College in Maine. It is a unique opportunity to interact with the researchers actively developing the exciting many methods related to crystallography and beyond. The conference is relatively small allowing close association with all in attendance allowing participants to discuss methods with those in the know. The Gordon Research Seminar is a two-day event before the Conference for those early in their career, e.g. students, postdocs, and beginning industry folks. This space allows young scientist to interact, ask questions, and discuss their science with peers. If you are interested in deepening your understanding of the methods behind crystallography, please consider applying to both the Gordon Research Seminar and Conference on Diffraction Methods. For all the details, please see: <goog_1374816820> https://www.grc.org/programs.aspx?id=16486 Apply soon! Any questions? Simply reply to this email. Thanks GRC chairs, Rike Müller-Werkmeister and Bradley Hintze

1 0

Coot does not start up with OS 10.11 El Capitan
by Benoît Masquida 22 Apr '16

22 Apr '16

Dear Phenix, The graphic window of coot does not open either launch from the shell or from Phenix GUI. Has anyone experienced (and solved) this problem on El Capitan (from Apple)? Thanks for your help. BM -- Benoît Masquida b.masquida(a)unistra.fr UMR 7156 GMGM tel: +33 3 68 85 14 81 fax: +33 3 68 85 13 65 IPCB - Plateforme de Biologie 4 Allée Konrad Roentgen 67081 STRASBOURG Cedex

2 2

phenix.polder - tool for calculating omit maps by excluding bulk solvent
by Dorothee Liebschner 21 Apr '16

21 Apr '16

Dear phenix users, Starting from the nightly build dev-2356, a new tool for calculating ligand omit-maps, called 'polder', is included in phenix. Usage: phenix.polder model.pdb data.mtz selection='chain A and resseq 123’ Phenix.polder calculates omit maps for atom selections by preventing the bulk solvent mask to flood into the atom selection area and its vicinity. The tool can be useful in cases where the density of the selected atoms is weak and possibly obscured by bulk solvent. Polder produces less biased maps compared to procedures where the atom selection occupancy is set to zero, and the atoms are included in the solvent mask calculation (in that case, the resulting difference density can have similar shape than the selected atoms). Phenix.polder excludes a larger volume from the bulk solvent and therefore prevents misinterpreting bulk solvent density as omit density. If you want to know more about how the tool is working and to see some examples, have a look at the presentation file: https://www.phenix-online.org/presentations/phenix_polder.pdf. The documentation page can be found here: www.phenix-online.org/version_docs/dev-2356/reference/polder.html Best wishes, Dorothee

4 8

fit_loops using loop_lib
by Greg Bowman 21 Apr '16

21 Apr '16

Hi all - I’m having a problem getting phenix.fit_loops to run using the loop library (loop_lib=True). The phenix.fit_loops seems to work fine without this keyword (I get a good solution for a test case), but I have 3A density and wanted to restrict solutions to the loop library for the poorer density regions. I am running this from the command line, with this input: phenix.fit_loops pdb_in=refine_35-delloop1170to1172.pdb mtz_in=refine_35.mtz \ seq_file=KRJmonomer.seq start=1170 end=1172 chain_id=B \ loop_lib=True >> fit_loops-1170to1172-looplibrary.log I am using OSX ElCapitan (10.11.3) and get this error: File "/Applications/phenix-1.10.1-2155/build/../modules/phenix/phenix/command_line/fit_loops.py", line 962, in <module> fit_loops=fit_loops(args=sys.argv[1:]) File "/Applications/phenix-1.10.1-2155/build/../modules/phenix/phenix/command_line/fit_loops.py", line 598, in __init__ target_time=target_time, File "/Applications/phenix-1.10.1-2155/build/../modules/phenix/phenix/command_line/fit_loops.py", line 760, in run_fit target_time=target_time, File "/Applications/phenix-1.10.1-2155/modules/phenix/phenix/autosol/UserMethods.py", line 3671, in Build_fit_gaps starting_residue_number=starting_residue_number) File "/Applications/phenix-1.10.1-2155/modules/phenix/phenix/loop_lib/clustering.py", line 2063, in apply_clusters d=get_density_map(map_coeffs_array=map_coeffs_array) File "/Applications/phenix-1.10.1-2155/modules/phenix/phenix/utilities/get_density_map.py", line 54, in __init__ assert not map_coeffs_array.anomalous_flag() AssertionError The last lines of the log file are: Fitting loop with loop-library... loop_lib length (including 3 on each end): 9 DATABASE: /Applications/phenix-1.10.1-2155/modules/chem_data/loop_library/loops_9_2.5/loop_lib CLUSTER_FILE: split_clusters.pkl.gz Thanks, Greg

2 1

clash_guard failure
by Bock, Tobias 20 Apr '16

20 Apr '16

Dear colleagues, I am trying to refine a protein-DNA complex. In this structure, 2 DNA double strands are present with 50% occupancy (or similar occupancy’s) and overlap at certain positions. Phenix.refine crashed due to a nonbonded interaction distance issue. To fix that, I tried to exclude the DNA strands using: pdb_interpretation { custom_nonbonded_symmetry_exclusions="chain E" custom_nonbonded_symmetry_exclusions="chain F" } Nevertheless, phenix.refine crashed with the same error message. Changing the “nonbonded_distance_threshold” works, but results in terrible statistics (since this applies for the complete structure, I guess). Is there a way to exclude only the DNA strands (in regard to the clash guard) or a similar approach to refine the structure? Thank you in advance for your help, Tobias ________________________________ Helmholtz-Zentrum für Infektionsforschung GmbH | Inhoffenstraße 7 | 38124 Braunschweig | www.helmholtz-hzi.de Das HZI ist seit 2007 zertifiziertes Mitglied im "audit berufundfamilie" 50 Jahre Spitzenforschung - 50 Jahre HZI: www.helmholtz-hzi.de/50 Vorsitzende des Aufsichtsrates: MinDir’in Bärbel Brumme-Bothe, Bundesministerium für Bildung und Forschung Stellvertreter: MinDirig Rüdiger Eichel, Niedersächsisches Ministerium für Wissenschaft und Kultur Geschäftsführung: Prof. Dr. Dirk Heinz; Franziska Broer Gesellschaft mit beschränkter Haftung (GmbH) Sitz der Gesellschaft: Braunschweig Handelsregister: Amtsgericht Braunschweig, HRB 477

2 1

Re: [phenixbb] Merging Already-Scaled MTZs
by Tim Gruene 20 Apr '16

20 Apr '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Jacob, I overlooked the s at mtz, i.e. I thought you wanted to re-merge a single data set. My apologize for this. Your question is correctly formulated and perfectly valid. I would try pointless (easy) or cad (a little tedious but more prone to work) followed with aimless and its keyword 'onlymerge'. Best regards, Tim On Wednesday, April 20, 2016 07:36:07 PM you wrote: > Depends on your definition of "merge." What verb would you use for the > process I am describing? > > JPK > > -----Original Message----- > From: Tim Gruene [mailto:[email protected]] > Sent: Wednesday, April 20, 2016 3:05 PM > To: phenixbb(a)phenix-online.org > Cc: Keller, Jacob > Subject: Re: [phenixbb] Merging Already-Scaled MTZs > > Dear Jacob, > > it is technically not possible to merge relfection data twice, unless you > change to a higher symmetry space group: merging means replacing symmetry > related reflections with their mean. > > For scaling this is different - couldn't you repeat the scaling step? I am > not sure if phenix contains data processing software, I thought it starts > at data analysis and structure solution. > > Cheers, > Tim > > On Wednesday, April 20, 2016 06:59:04 PM Keller, Jacob wrote: > > Dear Crystallographers, > > > > I guess it is bad practice to merge/scale already-merged/scaled mtz's, > > but I have a special reason for wanting to do so. Does anyone know how > > this can be done in Phenix? > > > > The reason is, if you're interested, that I want to detwin several > > different datasets to varying degrees, then merge them. > > > > JPK > > > > ******************************************* > > Jacob Pearson Keller, PhD > > Looger Lab/HHMI Janelia Research Campus > > 19700 Helix Dr, Ashburn, VA 20147 > > email: kellerj(a)janelia.hhmi.org > > ******************************************* > > > > > > _______________________________________________ > > phenixbb mailing list > > phenixbb(a)phenix-online.org > > http://phenix-online.org/mailman/listinfo/phenixbb > > Unsubscribe: phenixbb-leave(a)phenix-online.org > > -- > -- > Paul Scherrer Institut > Tim Gruene > - persoenlich - > OFLC/102 > CH-5232 Villigen PSI > phone: +41 (0)56 310 5297 > > GPG Key ID = A46BEE1A - -- - -- Paul Scherrer Institut Tim Gruene - - persoenlich - OFLC/102 CH-5232 Villigen PSI phone: +41 (0)56 310 5297 GPG Key ID = A46BEE1A -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iD8DBQFXF9yHUxlJ7aRr7hoRArioAKDxnnJxNGZaAbV8PDmUprCJuvk7mwCg21jr wG0I05gbSvcFjrfzndkNRWY= =BHXV -----END PGP SIGNATURE-----

2 2

Merging Already-Scaled MTZs
by Keller, Jacob 20 Apr '16

20 Apr '16

Dear Crystallographers, I guess it is bad practice to merge/scale already-merged/scaled mtz's, but I have a special reason for wanting to do so. Does anyone know how this can be done in Phenix? The reason is, if you're interested, that I want to detwin several different datasets to varying degrees, then merge them. JPK ******************************************* Jacob Pearson Keller, PhD Looger Lab/HHMI Janelia Research Campus 19700 Helix Dr, Ashburn, VA 20147 email: kellerj(a)janelia.hhmi.org *******************************************

2 1