- phenixbb - phenix-online.org

AsCA 2018/CRYSTAL 32: Registration Open!
by Christopher Squire 11 Apr '18

11 Apr '18

? [https://az659834.vo.msecnd.net/eventsairseasiaprod/production-uoaevents-pub…] Dear Colleagues, Registration for the AsCA 2018/CRYSTAL 32 Conference (2 - 5 December 2018 at the University of Auckland, New Zealand) is now open! Please follow this link to register http://asca2018.org/registration/ Workshop registration is not yet open, however please use the voting function here<http://asca2018.org/workshops/> to advise which of the four potential workshops would be of most interest to you. Finally, a reminder that submissions are now open. Please visit the Call for Abstracts<http://asca2018.org/call-for-abstracts/> page for more information and to submit an abstract. Should you have any queries regarding the AsCA 2018/CRYSTAL 32 Conference, please do not hesitate to contact us using the email address listed below. Kind regards, Event Services University of Auckland Email: asca2018(a)auckland.ac.nz<mailto:[email protected]> [https://az659834.vo.msecnd.net/eventsairseasiaprod/production-uoaevents-pub…]

1 0

Phenix video tutorials
by Dorothee Liebschner 10 Apr '18

10 Apr '18

Dear Phenix users, This is an update for the Phenix video tutorials. There are now 25 videos, explaining Phenix tools for X-ray crystallography and cryo-EM. New videos include topics such as model and data validation (Xtriage, Molprobity), phasing (Phaser, AutoSol) and tools for cryo-EM. A categorized overview is on the phenix homepage: https://www.phenix-online.org/documentation/reference/tutorial_channel.html You can also browse the videos directly on the Phenix Tutorial YouTube channel: https://www.youtube.com/c/phenixtutorials (To see subtitles, hit the cc (closed captions) button in the right bottom of the video screen. Subscribe to see the tutorial videos in your YouTube subscription feed. To get notifications about new videos, tap the bell button, which is next to the "subscribe" button.) Feedback about the videos is very welcome. Write an email to tutorials(a)phenix-online.org or use the comment section on YouTube. If you want to see a tutorial about a certain (Phenix-related) topic, don't hesitate to tell us. Best wishes, The Phenix team

1 0

9th workshop on Neutron Scattering Applications in Structural Biology
by Meilleur, Flora 09 Apr '18

09 Apr '18

Second announcement 9th Workshop on Neutron Scattering Applications in Structural Biology Oak Ridge, TN. June 11 - June 15, 2018 Travel and accommodation expenses are supported for selected participants. No registration fee. Detailed information can be found on the workshop web page: https://conference.sns.gov/biologyneutrons18/ Application deadline: April 30, 2018 The workshop on Neutron Scattering Applications in Structural Biology aims at enabling structural biologists to fully exploit the latest instrumentation and software development at the SNS and HFIR facilities at Oak Ridge National Laboratory. Attendees will participate in lectures and tutorials focusing exclusively on neutron techniques applied in structural biology. The workshop is designed for graduate students, post-doctoral fellows and faculty new to or with limited experience of neutron scattering. Flora Meilleur, Ph. D Neutron Scattering Scientist, Neutron Sciences Directorate Oak Ridge National Laboratory Associate Professor, Molecular and Structural Biochemistry North Carolina State University

1 0

FW: Announcement of European Crystallographic Computing Forum 2018 in Mieres, Spain
by Tom Terwilliger 09 Apr '18

09 Apr '18

Registration for the European Crystallographic Computing Forum is open: https://www.mrc-lmb.cam.ac.uk/harry/ecacomsig/mieres.html A poster for print can be downloaded here: https://we.tl/CyPFzYvorG Spread the word! The Forum will be held in Mieres, Spain, 18th - 22nd August 2018 (preceding the ECM). We invite both beginners (from graduate level) and experienced software developers from all crystallographic disciplines. Participants can bring their own software development project to work on it in teams, interspersed with tutorials and lectures. There will be opportunity to exchange and connect with other crystallographic software developers. The registration fee (360 €) includes: accommodation (4 nights), full board and refreshments and transfer to the ECM. We offer childcare and family rooms. Bursaries are available. We hope to see you there! The Organisers Andrea Thorn, Harry Powell, Laura Roces Fernandez We would like to thank our kind sponsors! - CCP4 - Dectris - Rigaku - Bruker -

1 0

TaBr SAD Autosol and Phaser
by Ian S 09 Apr '18

09 Apr '18

Hi Phenixbb, I trying to phase a structure soaked in TaBr and am running into some technical problems. My anomalous signal goes out to about 4.5 and I have a 1.9A native data set. SIR hasn't worked so far. Autosol SAD has given me several convincing solutions when searching for Tantalum (not TX), finding 11 sites (not clustered) at 6 angstroms: FOM =0.478, map=0.1.3, and corr of 0.82 and a final score of 37+-15.71. By only playing around with the sites I can get an overall score of 73 +- 4.58, map skew to 0.5, and a RMS density to 0.79, thought the R-factor increases to .43 and the FOM . Perhaps not suprisingly at this resolution, the map is uninterpretable (maybe some helices) so I'm trying to improve the phases by model building and by using Phaser and giving it TX sites. If I put the Ta sites in Phaser with the same dataset as Autosol, I get a FOM of .342. If I use the TX label it drops to 0.143. What is happening here? I know that typically TaBr has one or two major sites (my protein isnt massive, only about 1200 aa predicted in the ASU) , so I use only the top two major sites and have the same problem. Does this indicate that the Ta sites Autosol found are not in fact the sites I'm looking for? Or maybe that there really are 10 TaBr sites all with low occupancy? Any suggestions would be appreciated. Thank you. Best, Ian

3 6

linking only one conformer to a thiol
by Krzysztof Bzymek 06 Apr '18

06 Apr '18

Hi, I'm trying to refine a structure with a disulfide bond between a cysteine and a thiol-containing peptide. There are two conformations for the thiopeptide, in one of them the thiol is facing away from SG of the cysteine (~7 A away). I defined the link as: refinement.pdb_interpretation { apply_cif_link { data_link = DRG-CYS residue_selection_1 = chain A and resname DRG and resid 10 residue_selection_2 = chain B and resname CYS and resid 20 } } I also tried: refinement.pdb_interpretation { apply_cif_link { data_link = DRG-CYS residue_selection_1 = chain A and resname DRG and resid 10 and altloc A residue_selection_2 = chain B and resname CYS and resid 20 } } After refinement (with a corresponding data_link.eff file defining the bonds and angles), the thiol of the other conformer that was facing away from the cysteine moves out of the electron density and now faces the cysteine (still about ~5.7 A away). Is there a way to define a link between only one conformer and have the other refine independently? I did try refinement without the above link definition (relying on the proximity of the two cysteines and automatic linking in phenix) but some of the bond and dihedral angles showed higher deviation from ideal values expected for disulfide bonds. Thanks, Chris

2 1

23rd Annual SCSB Symposium, April 28th, Galveston Texas
by Mark A. White 05 Apr '18

05 Apr '18

You and your colleagues are cordially invited to join us for the 23rd Annual Structural Biology Symposium to be held at Levin Hall on the University of Texas Medical Branch Campus on beautiful Galveston Island on Saturday, April 28, 2018. The meeting is organized by the Sealy Center for Structural Biology & Molecular Biophysics and co-sponsored by the Keck Center for Computational & Structural Biology. This year’s speakers include: Grant Jensen, Ph.D., California Institute of Technology “Progress and Challenges in Electron Cryotomography” Ayyalusamy Ramamoorthy, Ph.D., University of Michigan “Membrane-Assisted Dynamic Protein-Protein Interactions by NMR" Andrew Routh, Ph.D., University of Texas Medical Branch “Parallel ClickSeq and Nanopore Deep-Sequencing Characterizes the Emergence and Evolution of Defective Viral Genomes” Joan-Emma Shea, Ph.D., University of California Santa Barbara “Binding and Assembly of Intrinsically Disordered Peptide” Yizhi Tao, Ph.D., Rice University “The Tail of a Nematode Virus” Adam Zlotnick, Ph.D., Indiana University “Multiple Mechanisms for Assembly-Directed HBV Antivirals” To register or for more information, visit http://scsb.utmb.edu/symposium -- Yours sincerely, Mark A. White, Ph.D. Associate Professor of Biochemistry and Molecular Biology, Manager, Sealy Center for Structural Biology and Molecular Biophysics Macromolecular X-ray Laboratory, Basic Science Building, Room 6.658A University of Texas Medical Branch Galveston, TX 77555-0647 Tel. (409) 747-4747 mailto://[email protected] http://xray.utmb.edu QQ: "For a man to conquer himself is the first and noblest of all victories." - Plato

1 0

Rfree and a low resolution data set
by Toon Van Thillo 04 Apr '18

04 Apr '18

Hi all, Currently I am refining a data set which showed anisotropic diffraction. Aimless suggested cutoffs at 2.3, 2.6 and 3.6 angstrom for the h,k and l axis. I chose a general 3.6 cutoff to obtain satisfactory statistics for Rmeas, I/sd(I) and CC1/2. At this resolution the data set consists of approximately 2800 reflections. Generally 5% of the set is set aside as the Rfree test set and I found that a minimum of 500 reflections in total is used to produce a reliable Rfree. However, 5% only amounts to 140 reflections in this case. I am hesitant to include more reflections as I would have to go up to 20% of the reflections to obtain more than 500 reflections for the test set. In a discussion on the CCP4 message boards some time ago it was suggested to do multiple refinements with different test sets: https://www.jiscmail.ac.uk/cgi-bin/webadmin?A2=ind1411&L=ccp4bb&F=&S=&P=125… In the thread it was also discussed that a least squares approach is prefered when using a small test set. However, when using a LS target, the resulting Rfree is very high (10% higher than when using the automatic option) and phenix.refine? produces awful geometry (24% ramachandran outliers, 105 clashcore...). It seems that the refinement is performed without restraints? Optimize X-ray/stereochemistry weight does not result in improved stereochemistry. My question is if the LS approach is still relevant and if so, is there an explanation (and solution) for the bad statistics? Kind regards, Toon Van Thillo

6 6

A new capability on the STARANISO server: "PDBpeep"
by Gerard Bricogne 29 Mar '18

29 Mar '18

Dear all, Ever since the WebGL viewer became available on the STARANISO server, we have found ourselves using it with increasing frequency to take a quick look (a "peep") at the diffraction data deposited with various PDB entries - for example, to try and identify a root cause for some sub-optimal refinement results, or, quite often, just out of sheer curiosity! This involved a totally straightforward procedure whereby the diffraction data file associated with a given PDB entry was downloaded from the PDB and subsequently uploaded to the STARANISO server. Gradually, however, this operation became so popular among some of us that we thought it would be useful to implement this simple procedure as an autonomous capability - and thus was born "PDBpeep" ! You can access this new feature by connecting to http://staraniso.globalphasing.org/cgi-bin/PDBpeep.cgi and enter a PDB code into the box. As indicated on that page, this provides only a cursory look at the overall quality of each dataset, and any further analysis or output can only be obtained by submitting the datafile to the STARANISO server. Better results would clearly be obtainable if the raw images for these datasets had been deposited and could be reprocessed, with the untruncated output of that processing then being submitted to the STARANISO server (reprocessing the images with autoPROC would combine those two steps into a single one). Most of the deposited datasets have been isotropically truncated, and their 3D view in WebGL often suggests that this truncation was too drastic. A number of entries will show infelicities - such as cusps and/or missing angular ranges, or even stripes caused by gaps between the modules of pixel detectors if the beam centre is at a position symmetric relative to those gaps - all marked up in blue. Our purpose in sharing this capability with the community is to bring a further contribution to the process of making everyone more "data quality aware" and keen to scrutinise more closely the protocols by which they collect diffraction data, or have such data collected on their behalf. We will be grateful to receive feedback about PDBpeep, just as we have been about the STARANISO server itself. With best wishes, The STARANISO developers.

1 0

MR Rosetta fails
by Aaron Oakley 29 Mar '18

29 Mar '18

Salvete! I am trying (unsuccessfully) to run MR Rosetta. Im using a MacBookPro running OS X 10.13.3. The job terminates with Sorry: mr_rosetta failed... Sorry routine failed Please see log file for full error message The relevant log file rebuild.log terminates with protocols.jd2.JobDistributor: [ WARNING ] The following options have been set, but have not yet been used: -in:file:extended_pose 1 I get the same error with phenix-1.13-2998 and phenix-dev-3092. I'm using rosetta_bin_mac_2018.09.60072_bundle. Advice accepted with thanks. a++ Aaron Oakley Associate Professor School of Chemistry | Science, Medicine and Health University of Wollongong NSW 2522 Australia T +61 2 4221 4347 | F +61 2 4221 4287

1 0